Power Cable and Battery Pack Options

Power Cords for Multiple Products

PS-009736-001 110-240 VAC Power Cord
Provides direct power to the TR-4 or TR-5 Receivers from a 110-240 VAC 50/60 Hz source.
PS-000338-002 12 Volt DC Charge/Power Cord
Used to power a TR-4 Receiver from most car power jacks ("cigarette-lighter" jack). (This cord can also be used to charge Telonics older TR-2 Receiver or TDP-2 Data Processor, neither of which is produced any longer.)
ADP-2 12 VDC Outlet Adapter
One cigarette-lighter plug on one end, two cigarette-lighter jacks on other.

Power Supply Options Specifically for the TR-5

PS-007248-001 12VDC Power Cord
Used to power TR-5 Receiver from a 12 volt DC, negative ground electrical system (automobile battery). The plug on this cord requires a cigarette lighter on the power source.

For use on these Telonics Products: TR-5
PS-006476-100 Rechargeable Li-Ion Battery Pack
A direct replacement for the Alkaline Primary Battery Pack which comes with all TR-5 Receivers. This option provides the user with the most advanced and energy dense rechargeable power system available today. Note that Li-Ion systems do not have the "memory" problems associated with the Nickel-xxx electrochemical systems of the past. This battery pack contains two independent batteries for redundancy and is capable of running the TR-5 unit for 24 hours without the display backlight and 18 hours with the backlight turned on. The recharge time for the system is just 4 hours. This option comes with its own charger, the PS006477-001 AC charge cord and includes two of the PS006478-001 rechargeable Sony Li-Ion batteries. No special tools are required for installation.

For use on these Telonics Products: TR-5
PS-006476-110 Rechargeable Li-Ion Battery Pack Housing
As above, but supplied without the PS006478-001 Li-Ion Batteries

For use on these Telonics Products: TR-5
PS-006477-001 AC Charge Cord
This special replacement charge cord is used for charging the PS-006476-100 Battery Pack Rechargeable Li-Ion Battery Pack from any 110-120 VAC 50/60 Hz outlet power source. This heavy-duty cord is designed specifically to charge both Li-Ion batteries while installed in the PS-006476 battery Pack. Please note this is not the same as the PS-009736-001 Power Cord used to operate the TR-5 directly from a 110-240 VAC 50/60 Hertz wall current.

For use on these Telonics Products: TR-5
PS-006478-001 Li-Ion Battery
This is a replacement battery (one battery) for the PS-006476 Li-Ion Battery Pack. Two of these batteries are contained in the PS-006476-100.

For use on these Telonics Products: TR-5
PS-006479-001 Li-Ion Battery Charger
This charger can be used to charge a single PS-006478-001 battery directly when not installed in the PS-006476-100 or PS006476-110 Rechargeable Battery Packs.

For use on these Telonics Products: TR-5
PS-005893-110 Alkaline Battery Pack Housing
This is a replacement housing for the 8AA Alkaline battery pack housing which comes with the TR-5 Receiver. This is the housing only and does not include the 8 Alkaline batteries.

For use on these Telonics Products: TR-5
RP-7 Field Power Pack
12 VDC. 7 Ampere-hour field power source. Sealed lead-acid, high impact case. 90 day warranty. Dimensions: 6.0 X 2.6 X 4.0 inches. Weight: 5.5 lbs. Designed for use in the TR-5 Data Acquisition System (see RC-9 Instrument Case). One RP-7 Power Pack will power the TR-5 for approximately 77 hours with TR-5 current requirement at 90 mA. Current requirement depends on RF/AF gain selected and backlight on versus off. Two RP-7 Power Packs will fit within the RC-9 Instrument Case along with the TR-5. Requires PS-008861-001 charger (purchased separately). International customers may also require additional power outlet adapters and AC Step down Transformer (PS-000527-001/RP-5).

For use on these Telonics Products: TR-5
PS-000527-001 (RP-5)
220/240 VAC to 110/120 VAC voltage converter, 50W maximum.
(no image available)
RP-14-110 Charger
110-120 VAC, 12 VDC, 800 mA for charging RP-7 Field Power Pack.

For use on these Telonics Products: TR-5
PS-008861-001 Charger
110-120 VAC, 12 VDC, 800 mA for charging RP-7 Field Power Pack. Note: For international customers (excluding Canada), adapters are required.

For use on these Telonics Products: TR-5