VHF Transmitter Configurations for Birds

LB-35 backpack mount
MOD-125 leg mount
MOD-125 leg mount

Telonics VHF transmitters designed for avian applications on larger birds group into two categories based on packaging and electronic technologies, and provide options for instrumenting birds weighing down to ~500 grams.

The models described below can be provided with various attachment options. Researchers can choose the most effective mounting technique for specific species as discussed further below and at the time of order. Some attachment options add weight to what is indicated below.

Models

MOD Hermetically-Sealed Models

The MOD series are fully-hermetically sealed for maximum reliability, with the transmitter, battery, and interconnects sealed into a single metal housing. This is the same technology used by NASA for maintaining high performance electronics in harsh environments. With hermetic packaging, there is no problem with moisture penetration even after years of deployment, except in cases of severe physical damage to the canister. No polymeric packaging offers this level of reliability. These configurations are typically provided with the MK-12 transmitter electronics, but the MK-11 can alternatively be used (see below).

Configuration Dimensions
L x W x H (in, cm)
Weight (g) Transmitter Electronics Life @60BPM
Standard Power (months)
Life @60BPM
Low Power (months)
MOD-080-3 1.3 x 0.7 x 0.9
3.3 x 1.8 x 2.3
36 MK-12 9.1 21.2
MOD-105-3 1.6 x 0.9 x 0.8
4.1 x 2.3 x 2.0
45 MK-12 9.1 21.2
MOD-125-3 1.6 x 0.9 x 0.8
4.1 x 2.3 x 2.0
53 MK-12 13.5 31.3
MOD-210-3 1.7 x 1.3 x 0.7
4.3 x 3.3 x 1.8
75 MK-12 18.0 41.0
MOD-225-3 1.8 x 1.3 x 0.7
4.6 x 3.3 x 1.8
85 MK-12 22.3 50.5
MOD-335-3 1.4 x 1.4 x 1.1
3.6 x 3.6 x 2.8
105 MK-11 26.6 59.6

LB Models

LB models use the same electronics (typically MK-12, but alternatively MK-11) and batteries as the MOD series; however, the packaging is polymeric. These units still provide excellent water resistance, such that water penetration is not an issue within the expected battery life of these configurations. LB configurations typically offer an improved operational life to weight ratio as compared to MOD configurations.

Configuration Dimensions
L x W x H (in, cm)
~Weight (g) Transmitter Electronics Operational Life @ 60BPM, Std Pow (months) Operational Life @ 60BPM, Low Pow (months)
LB-35-3 1.6 x 0.8 x 0.6
4.2 x 2.0 x 1.4
14.5 MK-12 4.6 10.8
LB-420-3 2.7 x 1.4 x 1.4
6.9 x 3.4 x 3.4
135 MK-11 30 42

The following LB models are currently unavailable, as they are being redesigned. Please check back at a later time.

Configuration Dimensions
L x W x H (in, cm)
~Weight (g) Transmitter Electronics Operational Life @ 60BPM, Std Pow (months) Operational Life @ 60BPM, Low Pow (months)
LB-38-3 1.6 x 0.8 x 0.5
4.2 x 2.0 x 1.3
14.5 MK-12 4.6 10.8
LB-39-3 1.3 x 0.8 x 0.6
3.3 x 2.0 x 1.6
15 MK-12 4.6 10.8
LB-60-3 1.5 x 0.8 x 0.4
3.8 x 2.0 x 0.9
10.5 MK-12 1.9 4.5
LB-65-3 1.8 x 0.75 x 0.4
4.7 x 1.9 x 0.9
13 MK-12 4.6 10.8
LB-81-3 1.5 x 0.8 x 0.8
3.9 x 2.0 x 2.0
30 MK-12 9.1 21.2

Operational lives listed above for MOD and LB models are calculated using Telonics Product Programmer (TPP), with assumptions of 60 beats per minute and operation 24-hours per day at 10°C. Duty cycling can extend operational life, e.g. operation for an average of 12-hours/day can increase lives by ~90%. Reduced pulse rates can also extend operational life; e.g. use of 30 beats per minute rather than 60 bpm can increase life by ~90%. Operation for extended periods at lower temperatures will decrease operational life. The MK-11 electronics are also available in smaller configurations; however, such use would decrease estimates of operational life by ~10-15% with standard power and temperatures above ~0°C, and up to about 45% with low power options and lower temperatures (the MK-11 is not an option in the MOD-050).

Key Features of MOD and LB series

  • MOD and LB models use either Telonics MK-11 or MK-12, both of which are microprocessor controlled transmitters which can be programmed using Telonics Product Programmer (TPP). The MK-11 has synthesized frequencies programmed through TPP; the MK-12 is crystal controlled. The MK-12 is most frequently used in smaller configurations because it provides longer life particularly at temperatures of ~0°C or below.
  • Customized transmission duty cycling (on/off periods) is available, including seasonal cycles which can vary throughout the life of the transmitter.
  • All timing is controlled by a Real-Time-Clock, which allows seasons to start and end on any desired calendar date and time and sensor data to be accurately time stamped.
  • MS6 mortality-motion option available at no additional charge.
  • Other sensor options are available, including the MA activity option, MS4 temperature option, and MS5 temperature-triggered mortality option (sensor descriptions are provided below). Data collection from these sensors is user programmable with Telonics Product Programmer (TPP).
  • Data Logging Option 350 is available to store mortality, activity, and/or temperature data in transmitter memory for download if the transmitter can be recovered.
  • Transmission power levels are selectable to accommodate either greater range or greater life (4 levels with MK-12 electronics, and 3 with MK-11).
  • Most configurations can be used on aquatic species as they are able to withstand the hydrostatic pressures experienced during an underwater dive of less than 100ft. Please call for details for applications on deep-diving birds.

Sensor Options for VHF Transmitters using the MK-11 or MK-12 Electronics

MK-11 or MK-12 Sensor Options

Data Logging Option (Option 350)

The Data Logging Option for MK-11 and MK-12 transmitters (Option 350) allows sensor data from the MS6 mortality-motion sensor, MA activity sensor, and/or the MS4 temperature sensor to be stored in transmitter memory and made available for download if the transmitter is able to be retrieved at the end of a study. Additional information regarding how these sensors work is provided in the Sensor Options section below. This option requires use of Telonics Data Converter to download the stored data.

For the MS6 motion-mortality sensor, the data logging records each date and time the sensor switches from active/alive to inactive/mortality or back. Assuming that no other sensor measurements are being stored, the data log can accommodate about 0.5 million transitions. Note that smaller units may not have sufficient battery capacity to fill the memory. The most recent 9-16 such transitions are recorded even without this option, but this option stores all such transitions.

For the MA activity sensor, the data logging option stores accelerometer data at user-defined intervals. These intervals may be the same throughout the anticipated life of the transmitter or they may change "seasonally". The activity data recorded is the number of active seconds (or other defined classification interval) during a defined collection interval. For example the number of active seconds in a one hour collection interval would be saved as a number between 0-3600. Assuming that no other sensor measurements are being stored, the data log can accommodate about 2.0 million measurements based on 30sec, 1 minute, or 5 minute intervals or about 1.3 million based on longer intervals. The activity collection schedule for data logging is independent of any activity schedule selected to control pulse rate.

For the MS4 temperature sensor, the data logging option stores temperature data at user-defined intervals (in 0.16°C increments). These intervals may be the same throughout the anticipated life of the transmitter or they may change "seasonally". The data log can store an estimated 1.3 million measurements if no other sensor data are stored. The temperature collection schedule for data logging is independent of any temperature schedule selected to control pulse rate.

Specifications for Transmitter Electronics

MK11/12 Transmitter General Specifications

MK-11 and MK-12 beacons are microprocessor controlled pulsed-CW transmitters, designed for operation within the 137 - 225 MHz frequency range. Each MK-11 beacon transmits on a single, field-programmable frequency (within the frequency range that is ordered). MK-11 beacons also support 3 field-programmable power levels. The MK-12 beacon is crystal based, and therefore each beacon is built to operate on a specific frequency and with a specific power output (four power levels to choose from when ordering).

Frequency Range MK11:
137 - 143 MHz (option 700),
143 - 156 MHz (option 710),
154 - 164 MHz (option 720),
162 - 174 MHz (option 730),
164 - 182 MHz (option 740),
182 - 201 MHz (option 750),
201 - 222 MHz (option 760)

MK12:
140 - 225 MHz
Frequency Tolerance MK11:
Calibration: ±3 ppm max at room temperature / ±5 ppm from -40° to +70°C
Aging: <1ppm/yr
Shock: <1ppm 3000g x 0.2ms x ½ sine x 3 directions

MK12:
Calibration: ±17 ppm at room temperature / ±25 ppm from -40° to +70°C
Load: <7ppm typical for VSWR < 6:1
Supply Voltage: <3ppm typical over supply voltage range at 25°C
Aging: <1ppm/yr
Shock: <1ppm 3000g x 0.2ms x ½ sine x 3 directions
VSWR Stability MK11: RF output stable to 10:1 VSWR, all phases.
Radiated harmonic levels are degraded with poor load VSWR.
Spurious emission specification maintained for > 10:1 VSWR.

MK12: RF output stable to 5:1 VSWR, all phases.
Radiated harmonic levels are degraded with poor load VSWR.
Spurious emission specification maintained for > 5:1 VSWR.
Output Power
MK11: Field Programmable using TPP
Transmit Power Peak Power Output
Relative to Medium Power
Low 0.5 * Medium Power
Med  
High 2.0 * Medium Power

MK12: Ordering Options for Power Level
Option Transmit Power Peak Power Output Levels
Relative to Standard Power
200 Low (Temperature > -20°C) 0.5 * Medium Power (Higher efficiency)
202 Low 0.5 * Medium Power
204 Medium  
206 High 2.0 * Medium Power

Output power is measured into 50 Ω load. Effective Isotropic Radiated Power (EIRP) varies, depending on packaging, antenna configuration, and immediate environmental conditions.
Emission Designator MK11: 2k00P0N -
California users: These transmitters meet the California requirement of EIRP < 0.0009W for all conditions.
MK12: 1k00P0N -
California users: These transmitters exceed the emission designator requirement of 2k00P0N for operation in California. The 1k00P0N emission designator is identical to the 2k00P0N except that it occupies only half of the 2 kHz bandwidth allowed by the State of California for wildlife tracking.
Harmonic and Coherent Spurious Suppression MK11: <-30 dBc into 50Ω load
MK12: Coherent Spurious <-10 dBc
Spurious Suppression MK11: <-35dBc typical at > 10kHz offset from carrier
MK12: Non-Coherent Spurious <-50 dBc
RF Pulse Width 15 msec standard
Can optionally be configured from 10 - 250 msec
Pulse Period Configurable from 250 - 5000 msec (12-240 Bpm)
RTC Accuracy / Seasonal Timing Temperature Compensated:
± 12min/yr max
Temperature Range -40°C to +70°C (Note: Temperature range is for the transmitter only. The power supply must provide the required peak current and voltage requirements for the transmitter over the expected temperature range.)
Shutdown Component Externally shutdown by presence of a small magnet
Available Sensors
MS6 Mortality - Motion Sensor
MA Activity Sensor
MS4 Temperature Sensor
MS5 Temperature-triggered Mortality Sensor
Sensor descriptions available separately

Attachment Options

Various mounting techniques are used on birds, often with specific methods preferred for specific species. As examples, gluing is often used on passerines; necklaces on grouse; backpack harnesses on raptors, turkeys, and ducks; neck bands on geese; and leg bands on cranes. The selection of a mounting technique has both biological implications and transmitter performance issues that must be considered. Ideally, the attachment should have as little impact on the animal as possible. In addition, considerations such as the type of transmitting antenna and how it is positioned will affect longevity of the antenna on the animal. The preferred mounting technique for specific species sometimes changes as the influence of techniques become better understood. We recommend that researchers check the literature and consult with colleagues on the suitability of a particular mounting technique for a specific species. In some cases, implant technology is a viable option to external mounting techniques.

Backpack Harnesses

Backpack harnesses are designed to position the transmitter on the back of the bird between the wings with the antenna extending down the back towards or past the tail. The loops of the harnesses generally work into the feathers and may be secured on the breast. In some cases the loops extend over the head and tail of the bird, while in other cases they fit over the wings like the straps on a person’s backpack. Various harness materials have been used including leather, coated wire, elastics or bungee cord, and Teflon ribbon. The following backpack harness materials are available from Telonics:

  • MT-000555-001 Teflon ribbon harness material for small-bodied birds. Width: 0.25" (0.64 cm) Weight: 1.5g/foot.
  • MT-000555-002 Teflon ribbon harness material for large-bodied birds. Width: 0.5" (1.3 cm). Weight: 3.0g/foot.

Aprons, Bibs, and Ponchos

Aprons, bibs, and ponchos are designed to mount the transmitting subsystem on flat durable material such as Herculite. A hole is cut into the material, which the bird's head fits through, and the bird wears the system like an apron or bib. The antenna exits alongside of the bird’s neck towards their back. This kind of mount is often used with Gallinaceous birds that be adversely impacted by a backpack harness. The antenna is dressed along the material and exits past the neck and then drapes over the back of the bird.

Necklaces

Necklaces are similar to apron mounts; however, the material used makes the final assembly more closely resemble a collar. In general, a necklace holds the transmitter closer to the neck as compared to an apron mount.

Patagial Mounts

Patagial mounts position the transmitter on the wing of the bird. This technique is typically used on large, soaring birds such as vultures. Mounting may involve the transmitter being attached to a strip of material that is wrapped around the leading edge of the wing and secured, or the mounting mechanism may pierce through the patagium. In either case the transmitter typically positioned on the dorsal surface of the wing and the antenna is oriented parallel to the primary feathers.

Neckbands

Transmitters can be mounted on plastic neck bands, as are sometimes used to color mark and number waterfowl. The bands are coiled and flex open to fit around the neck. Typically a portion of the transmitting antenna is glued to the band and the remainder extends off the band. Telonics can mount transmitters on user-supplied bands.

Legbands

Leg bands are similar to neckbands, but they tend to be smaller in diameter and are often used to mark long-legged wading birds. They are typically mounted on the upper leg and rest on the knee. Weight is important because units that are too large can cause the band to wear against the skin of the knee joint. Any portion of exposed antenna is easily accessible by the bird and can be subject to preening and possible damage. The positioning of the antenna also results in it sometimes being submerged and thus negatively impacting system range. Telonics can mount transmitters on user-supplied bands.

Tail Mounts

Tail mounts involve directly attaching the transmitter to one or two deck feathers of the bird's tail. This technique has the advantage of using the natural molt of the bird's tail feathers as a breakaway mechanism. The units must be placed on hard pinned feathers and the antenna is often tied with surgical suture to the feather shaft. The timing of the attachment relative to the molt is an important consideration. Although the double feather mount is more stable and distributes the weight of the configuration over two feathers, one feather will likely molt before the other leaving the transmitter dangling from the remaining feather until it breaks or pulls out.

Glue

Gluing the unit directly to the skin of the bird involves the use of cyanoacrylate glues (e.g. Super Glue). This technique minimizes the weight of the overall transmitter configuration because there are no additional materials like harnesses, collars, or bands; however, gluing is normally only suitable for short-term attachments and are thus primarily used with small transmitters with short operational lives.

Implantation

Implantation is a technique used to place the transmitting unit a body cavity or under the skin of the bird. In such cases, the transmitter is coated in a physiological wax to minimize immunological reactions. This technique has the advantage that the unit is within the body contour, and there is no additional weight contributed by an attachment device. In species that do not wear external devices well, this may be the only practical means to instrument the animal.

Photo Gallery

MOD Configurations

LB Configurations

Legacy Products

This information on discontinued products is provided for individuals who are still using these older systems. Product descriptions may be time sensitive or even outdated. Please contact Telonics if you have questions.

Telonics supports these products as possible based on availability of parts, software, or other considerations; but no longer sells them new.

Service Commitment

Since 1970, Telonics has built a reputation based on product quality, product support, service, and customer satisfaction. Telonics strives to produce the highest quality products, and to support those products accordingly.

Because of extreme conditions and the unpredictable nature associated with most telemetry applications, problems occasionally arise. Most problems can be resolved quickly. In all cases, we hope to be able to work in partnership with users to resolve problems to the user's satisfaction and to uphold our demonstrated commitment to excellence. If problems should arise, all products must be returned to our factory for failure analysis.

Warranty: VHF Transmitting Subsystems

The VHF Transmitting Subsystem includes the following main components: internal digital and radio frequency electronics comprising the transmitter, power supply (battery), exterior packaging, transmitting antenna and attachment. A refurbished Subsystem is warranted as if the Subsystem was purchased new, unless otherwise stated.

Telonics warranties only the following with respect to the Subsystem:
1.1 The internal electronics (excluding batteries) are warranted to be free from defects in materials and workmanship and to perform to the operational specifications over the specified operating temperature range as published by Telonics for the rated operational life of the Subsystem (as recorded on the final test data sheet accompanying the unit), up to a maximum of three (3) years from the date of initial shipment of the Subsystem by Telonics.
1.2 The exterior packaging integrity of hermetically sealed subsystems are warranted for the full operational life of the Subsystem, up to a maximum of three (3) years from the date of initial shipment of the Subsystem by Telonics.
1.3 The exterior packaging integrity of polymerically sealed subsystems are warranted for the operational life of the Subsystem, up to a maximum of one (1) year from the date of initial shipment of the Subsystem by Telonics.

Limitations:
Although each Subsystem is supplied with a power supply in the form of a battery, Telonics does not manufacture batteries (electrochemical cells), and therefore cannot warranty the battery lifespan, mechanical integrity or other battery performance issues. However, Telonics conducts extensive testing of all types of electro-chemical subsystems to determine suitability to the application. Once an electrochemical system is chosen for a configuration, testing procedures are employed at Telonics to evaluate every individual battery that is installed in each transmitting subsystem. Even using these advanced testing procedures it is not possible to determine a specific battery's lifespan or mechanical integrity.

Telonics conducts tests to assure that each unit is transmitting at the power level selected by the user. Actual range performance is a system characteristic dependent upon numerous conditions including receiver sensitivity and noise figure, receiving antenna tuning and pattern, transmitter antenna integrity, line of sight conditions in the field, and vegetation and habitat conditions and other factors specific to individual study sites. Therefore it is not possible to warranty a minimum range that will be achieved for units deployed in the field.

"Packaging integrity" as applicable to 1.2 and 1.3 above, is limited to normal wear as encountered on the animal.

It is the purchaser's obligation to make certain that it orders the correct size and type of Subsystem for the particular type and size of animal that the Subsystem will be applied to, and no warranty is expressed or implied for any failure to meet operational specifications due in whole or in part to use of an incorrect size or type of Subsystem.

No warranty is expressed or implied with regard to abnormal events or damage due to human actions such as gunshot damage, vehicle encounters, etc. Further, no warranty is expressed or implied with regard to damage resulting from misuse, accidents, unauthorized service, extreme conditions, or other causes not specifically enumerated herein.

The entire risk, as to the results and performance of the Subsystem, is assumed by the customer. Neither Telonics, nor its suppliers, shall have any liability to the customer or any other person or entity for any indirect, incidental, special, or consequential damage whatsoever, regardless whether Telonics has been told of the possibility of such damages or that such damages might be foreseeable. Telonics has no responsibility or liability for the claims of any third party. Telonics' and its suppliers' maximum aggregate liability shall not exceed the amount paid by the customer for the Subsystem.

Exercising the Warranty
If a defect occurs, return the Subsystem to Telonics within the applicable time frame noted above at the following address: TELONICS, 932 E. IMPALA AVENUE, MESA AZ USA 85204-6699. Telonics does not assume responsibility for loss or damage to equipment during shipment. Telonics does not assume responsibility for delays resulting from shipment on commercial or private carriers. We insure all equipment shipped from our facility and suggest that shipments to Telonics also be insured. Customer shall arrange for and pay all shipping, insurance and related charges incurred in the shipment of Subsystems to and from Telonics under this warranty.

Upon the timely return to our facility within the applicable time frame noted above, if the exterior packaging integrity and/or internal electronics (excluding batteries) are defective, the Subsystem will be replaced or repaired, at Telonics' sole discretion, at no cost to the customer, other than shipping charges. This remedy is the exclusive remedy. This product is supplied without any further warranties or conditions, expressed or implied, including warranties of merchantability, quality or fitness for particular reason or those arising by laws, statutes or trade usage or course of dealing.

The above warranty extends only to the original purchaser and does not cover any Subsystem which is resold or otherwise transferred from the original purchaser to another party. The warranty will be extended to customers who purchase the Subsystem directly from a Telonics-authorized distributor.