![]() |
Quality Electronics for Wildlife, Environmental Research, and Special Applications |
![]() |
|
|
www.telonics.com / products / vhfAntennas / RA-7.php |
Page last updated on Tuesday June 22, 2010 |

Fig. 1. RA-7 VHF Antenna
| Name/ Description |
Standard Frequency Bands* | Number of Elements |
Antenna Gain | Connections on Antenna | Handheld | Fixed Site | Land Vehicles |
Boats & Ships |
Aircraft |
|---|---|---|---|---|---|---|---|---|---|
| 2 element folding | 148-152 MHz 150-154 MHz 159-162 MHz 164-168 MHz 168-172 MHz 170-174 MHz 216-220 MHz |
2 | 2 dBd | BNC female Cable not included |
![]() |
The RA-7 antenna is a foldable two element antenna based on the Yagi-Uda antenna array design. This two element design has a good front to back ratio and deep side nulls. The elements are foldable. The design is considered to be a "brush buster" and is great for applications where the antenna will be abused and other antennas might be damaged or broken. The replaceable elements are available in kits sold separately. The elements can be easily replaced in the field with few tools.
| Frequency Ranges | 148-152MHz, 150-154MHz, 154-155MHz, 159-161MHz, 160-164MHz, 164-168MHz, 168-172MHz, 170-174MHz, 216-220MHz |
| Gain | 2 dBd |
| Front to back ratio | 10 dB |
| Connector | BNC female |
| Number of elements | 2 |
| Reception Radiation Pattern | ![]() |
![]() |
CM-007350-001 Element Replacement Kit
Three replacement element sections with end capsSix #8-32 x 3/16 inch stainless set screws One 5/64 inch Allen wrench Frequency chart with cutting instructions Note: To replace all the elements on a single RA-7, four element sections are required and therefore two kits must be procured. |
![]() |
RW-2, coaxial cable, 5ft
|
For other coaxial cable lengths, please visit our cables page.
Since 1970, Telonics has built a reputation based on product quality, product support, service, and customer satisfaction. Telonics strives to produce the highest quality products, and to support those products accordingly.
Because of extreme conditions and the unpredictable nature associated with most telemetry applications, problems occasionally arise. Most problems can be resolved quickly. In all cases, we hope to be able to work in partnership with users to resolve problems to the user's satisfaction and to uphold our demonstrated commitment to excellence. If problems should arise, all products must be returned to our factory for failure analysis.