Telonics, Inc. Products - PT-100V Processor/Transmitter

Fig. 1

Introduction

Telonics designed the PT-100V (voice) Processor Transmitter specifically for long-term remote security applications in hostile environments. A single set of batteries provides up to one year of intrusion detection capability. The unit reports security breaches up to 7 miles (line-of-sight) away via RF transmission with synthesized voice annunciation.

A single PT-100V can process signals from up to three different detection technologies (seismic, passive infrared and magnetic) individually or in various combinations. The electronic circuitry performs sophisticated processing, allowing users to select a variety of operational parameters yielding maximum flexibility. Users can adjust these parameters in the field with a handheld programmer or with any Windows compatible laptop/desktop computer.

Eagle Telonics can sell products only to law enforcement, military, and government agencies; these products are for use only within such agencies.

Key Features

Adjustable sensitivity settings for detectors
Ability to discriminate between vehicles, pedestrian and four legged animals
Determines the intruder's direction of travel
Filtering for slow or fast moving objects
Qualifies intrusions by requiring multiple detectors to trigger before validation
Ability to detect attempts to disable or tamper with the unit
Selectable power level
Daily status transmission to verfiy link and report low battery conditions
Ability to specify days of the week and hours of operation
Selectable CTCSS sub-audible tones
Waterproof housing allows users to deploy the unit above ground or buried for covert monitoring
Remote antenna connection extends operational range

Mechanical

Size	13.5 x 12.9 x 6 in 343 x 327 x 152 mm
Weight, without batteries	9.3 lbs 4.2 kg
Weight, with 2 MN-918 batteries	14.75 lbs 6.7 kg
Case	Polypropylene with O-ring seal
Electronics	Hermetically sealed with all connections via glass-to-metal feed-thrus
Color	Black
External Bendix connections	4 PT-07E10-6S or equivalent
External antenna connections	1 stud-mount antenna
External TNC connections	1 TNC

Electrical

Frequency band	12 MHz
Minimum frequency	138 MHz
Maximum frequency	174 MHz
Channel spacing	12.5 KHz
Modulation type	Narrow band FM
Modulation deviation, typical	2.5KHz
Transmitter power output, low power	1.5 W ±1.5 dB @ 12 V into 50 Ω
Transmitter power output, high power	5 W ±1.5 dB @ 12 V into 50 Ω
Operating voltage, minimum	9 Vdc
Operating voltage, maximum	13.6 Vdc
Quiescent current, typical	1.5 mA
Peak transmit current, low power	1.5 A ±0.25 A
Peak transmit current, high power	2.5 A ±0.25 A
Power supply	(2) ea. MN918 or (4) ea. PC908
Voice coding	Synthesized male
CTCSS	Sub-audible tones, all 37 standard tones user selectable

Operational

Minimum operating temperature	-20° C
Maximum operating temperature	60° C
Number of sensor inputs	3
Seismic	Yes
Magnetic	Yes
Infrared	Yes
Waterproof	3 feet 1 m
Maximum altitude	25000 feet 7620 m
Maximum humidity	100%

Service Commitment

Since 1970, Telonics has built a reputation based on product quality, product support, service, and customer satisfaction. Telonics strives to produce the highest quality products, and to support those products accordingly.

Because of extreme conditions and the unpredictable nature associated with most telemetry applications, problems occasionally arise. Most problems can be resolved quickly. In all cases, we hope to be able to work in partnership with users to resolve problems to the user's satisfaction and to uphold our demonstrated commitment to excellence. If problems should arise, all products must be returned to our factory for failure analysis.

Warranty

Telonics warrants its products to be free from defects in material and workmanship for a period of one year from the date acquired. Telonics does not warrant batteries.

If a defect occurs, return the equipment to us within the proper time frame at the following address: TELONICS, 932 E. IMPALA AVENUE, MESA AZ USA 85204-6699. Damage to any equipment resulting from misuse, accidents, unauthorized service, extreme conditions, or other causes, is excluded from this warranty. Telonics does not assume responsibility for loss or damage to equipment during shipment. Telonics does not assume responsibility for delays resulting from shipment on commercial or private carriers. We insure all equipment shipped from our facility and suggest that shipments to Telonics also be insured.

Upon the timely return to our facility, if defective, the product will be replaced or repaired at our discretion at no cost to the customer. This remedy is the exclusive remedy. This product is supplied without any further warranties or conditions, expressed or implied, including warranties of merchantability, quality or fitness for particular reason or those arising by laws, statutes or trade usage or course of dealing.

The entire risk, as to the results and performance of the product, is assumed by the customer. Neither Telonics, nor its suppliers, shall have any liability to the customer or any other person or entity for any indirect, incidental, special, or consequential damage whatsoever, regardless whether Telonics has been told of the possibility of such damages or that such damages might be foreseeable. Telonics has no responsibility or liability for the claims of any third party. The maximum aggregate to the customer, of Telonics and its suppliers, shall not exceed the amount paid by the customer for the product.

Related Products

SP-500 Seismic Sensor
SP-500P Seismic Sensor
MG-510 Magnetic Sensor
IF-520 Passive Infrared Detector
IF-540 Passive Infrared Detector